space
BNCVAR124  bncvar
Item Length Description of the BNCVAR124 Price
1
210mm
8"

The BNCVAR124 is a 1/4 wave helical antenna with BNC connector, covered entirely with polyolefin rubber heatshrink The BNCVAR124 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna for use on the entire Air Band 118MHz to 136MHz.

Note: Also ideal for scanners that are mainly used for Air Band reception.

$35.00
Phone
02-4655-6677
space
sma

SMAVAR124

Item Length Description of the SMAVAR124 Price
2
210mm
8"

The SMAVAR124 is designed for transceivers where the SMA antenna connector is extended (RAISED) from the case of the transceiver.

A 1/4 wave helical antenna with SMA connector designed especially for hand held radios that have the SMA antenna connector raised extending from the case!

The SMAVAR124 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna for use on the entire Air Band 118MHz to 136MHz and is covered entirely with polyolefin heatshrink.

NOTE: This antenna may not fit neatly onto your scanner


Note: The SMAVAR124 has a diameter of 12mm at its base and may not fit some radios that have the SMA connector recessed into the radio, if this is the case then the SMAIVAR124 is the better choice.

$45.00
Phone
02-4655-6677

SMAIVAR124

Item Length Description of the SMAIVAR124 Price
3
210mm
8"

The SMAIVAR124 is designed for transceivers where the SMA antenna connector is recessed into the case of the transceiver.

A 1/4 wave helical antenna with SMA connector designed especially for hand held radios that have the SMA antenna connector recessed into the case!

The SMAVAR124 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna for use on the entire Air Band 118MHz to 136MHz and is covered entirely with polyolefin heatshrink.


Note:
Also ideal for scanners that are mainly used for Air-Band reception.
Note: The SMAIVAR124 will fit all hand held radios and scanners that have a SMA connection.

$45.00
Phone
02-4655-6677

space
AIRKIT    airkitchoice
Item Length Gain Description of the AIRKIT Price
4
830mm
33"
2dBi

AIRKIT

Ground Independent - no need to tune - no need to earth - works anywhere.

The AIRKIT is a ground independent fiberglass dipole antenna with 3.6m cable and a BNC connector. The AIRKIT is a popular air band antenna that can be mounted almost anywhere with excellent results. The Airkit is available with many different cable lengths, patch leads and frequencies including UHF CB - please ask !

The Airkit is coated with Black polyolefin and is available in also in White, RED, GREEN, BLUE or YELLOW.

The Airkit top section is a 1/4 wave 7mm thick 515mm long broadband antenna tuned to the center of the band i.e.: 124MHz The Airkit bottom section is a rubber ducky antenna 260mm long when tuned to the center of the band.


Pros  - Very broadband - Receives 118MHz to 136MHz, and for transmit covers almost 5MHz 121.5MHz to 126MHz.

Pros  - No need to tune - no SWR meter needed - Also available for any other part on the airband e.g. 127MHz

 

Note: When mounting this antenna on a king post, It should be 300mm away from the post to get the best results.

$125.00
Phone
02-4655-6677

space
 RDRM124    rdrmhi
Item Length Description of the RDRM124 Price
5
270mm
11"

The RDRM124 is a solid fiberglass former with flexible spring top & coated with black polyolefin rubber on a 5/16" fitting
The RDRM124 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMB mount (Z brackets are not recommended with this antenna)

Recommended Accessories - UL12BNC or UL12C with BMB or Mag12C


Note:
You should not use a spring with this antenna.

$40.00
Phone
02-4655-6677

space
SW2-124  sw2
Item Length Description of the SW2-124
Price
6
545mm
21"

Code : SW2-124   Antenna Only

The SW2-124 is a stainless steel 1/4 wave antenna suitable for all air band applications on a 5/16" fitting. The SW2-124 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount. (Z brackets are not recommended with this antenna)

Recommended Accessories -
A12C, or UL12C with BMB or Mag12C


Pros  - Broadband - Receives 118MHz to 136MHz, and for transmit covers almost 4MHz tuned to 122MHz to 126MHz.
     Please note that this antenna is tuned to favour the low end of the Airband and if possible the SWR should be checked

Pros  - No need to tune - no SWR meter needed - Can be tuned for any other part on the airband e.g. 127MHz

Cons - Not as broadband as the fibreglass M124-1 but is stainless steel and almost indestuctable


Note:
You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring

$30.00
Phone
02-4655-6677
swp


Code : SW2-124PC         Is the SW2-124 antenna with the UL12C Base, 3.6m cable & Pl259 connector as a pack.

OR

Code : SW2-124PBNC    Is the SW2-124 antenna with the UL12BNC Base, 3.6m cable & BNC connector as a pack.

$55.00
Phone
02-4655-6677
space
M124-1  airant
Item Length Description of the M124
Price
7
515mm
20"

Code : M124   Antenna Only

The M124-1 is a fiberglass 1/4 wave antenna suitable for all air band applications on a 5/16" fitting. The M124-1 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna)

The M124-1 is coated with Black polyolefin and is available in also in White, RED, GREEN, BLUE or YELLOW.


Recommended Accessories -
A12C, or UL12C with BMB or Mag12C


Pros  - Broadband - Receives 118MHz to 136MHz, and for transmit covers almost 5MHz tuned to 121MHz to 126MHz.

Pros  - No need to tune - no SWR meter needed - Also available for any other part on the airband e.g. 127MHz


Note:
You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring

$40.00
Phone
02-4655-6677

swp


Code : M124PC         Is the M124 antenna with the UL12C Base, 3.6m cable & Pl259 connector as a pack.

OR

Code : M124PBNC    Is the M124 antenna with the UL12BNC Base, 3.6m cable & BNC connector as a pack.

$65.00
Phone
02-4655-6677
space
M124-3  m124-3choice
Item Length
Gain
Description of the M124-3 Price
8
1670mm
66"
3dBi

Then M124-3 is a fiberglass 5/8 wave antenna suitable for vehicle and base applications on a 5/16" fitting, The M124-3 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna)

Recommended Accessories -
A12C, or UL12C with BMB or Mag12C

Note: You Should NOT use a spring with this antenna.

Note: A M124-3 on a MAG12BNC put upside down on the guttering of the house is an simple solution for a base station antenna

$60.00
Phone
02-4655-6677
space
 

Air Band Base Antenna

       CDB124  cdb124

Item
Length
Gain Description of the CDB124
Price
9
1450mm
57"
3dBi

The CDB124 is a fiberglass ground independent base antenna that has a 20mm aluminum anodized tube for mast mounting. The CDB124 is broadband covering the entire AIR band 118MHz to 136MHz without the need for tuning, however, is centered on 124MHz and has a bandwidth of 6MHz under 1.6:1 SWR it is therefore important that the desired transmit frequency is taken into consideration.


The CDB124 has a SO239 Connector at its base in order to connect to a standard PL259.


Pros  - Very broadband - covers the entire Airband 118 to 136MHz

Pros  - Ideal for scanning the Airwaves


Cons - Not suitable for mobile use and should be mounted as high as possible to get the best performance

Recommended Accessories - Mast Mounting


$165.00
Phone
02-4655-6677
space

1090MHz Mode-S / ADS-B Omni-directional High Gain Antennas

 

san1090

10

Specifications

Order Code ... SAU1090

Type ......... collinear

Pattern ...... Omni-directional

Total Length . 950mm or 38

Total Weight . 240grams

Impedance .... 50Ω

Tuning ....... Factory preset

Frequency .... 1070MHz ~ 1100MHz

Gain ......... 8.0dBi

VSWR ......... < 1.5:1 over 30MHz

Mounting ..... 1/2" UNF Male

Cable ........ 1Mtr RG58Cellfoil

Connector .... N - Female, SMA etc

 

The above specifications represent the maximum
performance when the antenna is in its best position

SAU1090

The SAU1090 is a fiberglass high gain multi element omnidirectional collinear antenna that is designed for use for ADS-B reception. The SAU1090 has approximately one metre long of 50Ω low loss coax terminated in a FME Female Connector, however, the antenna can be supplied with any connector but the size of the connector is to be taken into consideration as it has a 1/2" nut at its base.

Note:
The SAU1090 can be supplied with any length coax and with almost any connector PLEASE ASK.
Note: The coax is to be kept as short as possible to get the best performance.

 

Antenna Made to Order Price = $175.00

Phone
02-4655-6677