space
BNCVAR+freqbncvar
Length Description of the BNCVAR+freq 180MHz ~ 400MHz Price
210mm
8"

A 1/4 wave helical antenna with BNC connector, covered entirely with polyolefin rubber heatshrink. The BNCVAR has a specially made 1/4λ phosphor bronze helical coil tuned to produce a low SWR and an exceptionally broadband antenna

The BNCVAR can be supplied tuned to any frequency from 180 to 400MHz simply ask or you can order on line with the code "BNCVAR" followed with the frequency required eg: BNCVAR163 for 163MHz

 

Note: This antenna can be supplied as a TNC or N connector or any colour

Note: Also ideal for scanners that are mainly used on High band VHF.

$35.00
Phone
02-4655-6677
space
sma

SMAVAR+freq

Length Description of the SMAVAR+freq 180MHz ~ 400MHz Price
210mm
8"

The SMAVAR+freq is designed for transceivers where the SMA antenna connector is extended from the case of the transceiver.

The SMAVAR can be supplied tuned to any frequency from 180MHz to 400MHz simply ask or you can order on line with the code "BNCVAR" followed with the frequency required eg: SMAVAR163 for 163MHz.

A 1/4 wave helical antenna with SMA connector designed especially for exposed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink. The SMAVAR has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna.

 

Note: Also ideal for scanners that are mainly used for 2m band.

 

NOTE: This antenna may not fit neatly onto your transceiver


Note: The SMAVAR has a diameter of 12mm at its base and may not fit some radios that have the SMA connector recessed into the radio, if this is the case then the SMAIVAR is the better choice.

$45.00
Phone
02-4655-6677

SMAIVAR+freq

Length Description of the SMAIVAR+freq 180MHz ~ 400MHz Price
210mm
8"

The SMAIVAR is designed for transceivers where the SMA antenna connector is recessed into the case of the transceiver.

The SMAIVAR can be supplied tuned to any frequency from 180MHz to 400MHz simply ask or you can order on line with the code "BNCVAR" followed with the frequency required eg: SMAIVAR163 for 163MHz.

A 1/4 wave helical antenna with SMA connector designed especially for recessed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink. The SMAIVAR has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna.

 

Note: Also ideal for scanners that are mainly used for 2m band.


Note: The SMAIVAR172 will fit all hand held radios and scanners that have a SMA connection.

$45.00
Phone
02-4655-6677

space

SW2   sw2
Length Description of the SW2
Price
630mm
25"

Tuned length
depends on
the frequency

Stainless steel 1/4 wave antenna can be tuned from 108MHz upward to 500MHz.

This antenna is not pretuned and comes with a cutting chart for customer tuning.

The SW2 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the Mobile One BMB mount. (Z brackets are not recommended with this antenna)


This antenna is available for tuned for frequencies from 160MHz to 180MHz state the tx frequency range required


Pros  - Stainless Steel

Cons  - Not as broadband as the M172-1 (see below)

Recommended Accessories - UL12C with BMB or Mag12C. Z Bracket is not recommended
Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring


$30.00
Phone
02-4655-6677

Code : SWP
The SW2 antenna with the UL12C Base cable & Plug as a pack    swp

$55.00
Phone
02-4655-6677

Code : SWPBNC
The SW2 antenna with the UL12BNC Base cable & Plug as a pack    swp

$55.00
Phone
02-4655-6677
space
cd1300 mag antenna
M1 Code
Length
Gain
Price A$
M1 Code
Length
Gain
Price A$
C1300H
200mm
3dBi
$75.00
K1300H4
220mm
3dBi
$135.00

The C1300H is a low profile ground independent 1/2 wave antenna with 1/2" fitting to suit a gutter mount, boot mount, Z bracket or similar, it is usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector.

 

This antenna is available for any frequency
from 400MHz to 2.4gHz


Recommended Accessories -
BMB

The K1300H4 is a low profile ground independent 1/2 wave antenna on a magnet mount, usually supplied with 3.6m coax plus a fme connector but can

be supplied with any length of cable and with any connector.

 

 

This antenna is available for any frequency
from 400MHz to 2.4gHz