Digital Radio & TV Antennas

1/2 Wave  2dB Gain for DAB+ Digital Radio Band 3 (9C) & TV 195MHz to 220MHz.

The antennas below are specially designed for use in mobile applications Infonformation
First make sure the radio or TV has an external antenna input, then determine whether it is a 300Ohm or a 75 Ohm impedance

If the connection is a standard TV plug (Push in) type or a F Connector then it is 75 Ohms,
If the connection is a SMA (tiny screw in) then it may be 50 Ohms. 
If in doubt please feel free to phone us!


The antennas below are NOT Ground Independent and require to be mounted onto a metal surface

 

 M206  m206

Item Length Description of the M206 Antenna Only
Price
1
840mm
33"

Made specially for Mirror Mounts

The M206 is for a digital TV's or Digital Radio's that have a standard TV type plug.

The M206 is a 1/2 wave 2dB gain broadband antenna designed for both Digital Radio & Digital TV as a mobile antenna, It is covered with polyolefin for heavy duty use. It is designed mainly for use on the bonnet of a car and for mirror mounts on trucks or vans.

The M206 can be supplied in most colours.

 

Note - The M206 can be used on either the 75 Ohm cable or the 50 Ohm Cable SEE BELOW
Note - The use of a spring is not recommended with this antenna as it will slightly reduce the performance.

 

Recommended Accessories - BMB bonnet mount or Z bracket.
Pros - Suitable for all mounting positions on vehicles.
Cons - None that I can think of.

$50.00

M206P m206p

The cable for the M206 requires a standard push in TV plug, these are available at your local hardware store  

Item Length Description of the M206P Antenna Pack with 75 Ohm Cable
Price
2
840mm
33"

Made specially for Mirror Mounts
The M206P is for a digital TV's or Digital Radio's that have a standard TV type plug.

The M206P is a 1/2 wave 2dBi gain broadband antenna designed for both Digital Radio & Digital TV as a mobile antenna, It is covered with polyolefin for heavy duty use. It is designed mainly for use on the bonnet of a car and for mirror mounts on trucks or vans. The M206P is supplied with the 3.6m long A4_75 base & cable assembly 3.6m long or let us know your requirements

The M206P can be supplied in most colours.


Note: You will need to cut the coax to your required length and install a TV plug ( $2 Shop or Bunnings etc) .

 

Note Connectors - Mobile One can supply the M206P with either a F Connector or a BNCMALE connector. please note that the only connectors that fit on 75Ω coax are BNCMALE, F, or RCA TV.


Recommended Accessories - BMB bonnet mount or Z bracket.

Pros - Suitable for all mounting positions on vehicles.
Cons - None that I can think of.

Note: The use of a spring is not recommended with this antenna as it will reduce the performance.

$75.00


M206SP m206sp

Item Length Description of the M206SP Antenna Pack with 50 Ohm Cable and Connector
Price
3
830mm
33"

Made specially for Mirror Mounts

The M206SP is for a digital TV's or Digital Radio's, and are supplied with a SMA type connector ( tiny brass 6mm dia ).

 

The M206SP is a 1/2 wave 2dBi gain broadband antenna designed for both Digital Radio & Digital TV as a mobile antenna, It is covered with polyolefin for heavy duty use. It is designed mainly for use on the bonnet of a car and for mirror mounts on trucks or vans. The M206SP is supplied with the 3.6m long UL12SMA base & cable assembly with a SMA male connector .

The M206SP can be supplied in most colours.

Recommended Accessories -
BMB bonnet mount or Z bracket.

Pros - Suitable for all mounting positions on vehicles.
Cons - None that I can think of.

Note: The use of a spring is not recommended with this antenna as it will slightly reduce the performance.

$75.00

The antennas below ARE Ground Independent - not requiring a ground plane


SAN206W  san206

SAN206B  san206

4

Specifications

Order Code ... SAN206W (White)
Order Code ... SAN206B (Black)

Type ......... 1/2 Wave

Gain ......... 2dBi Both Radio & TV

Pattern ...... Omnidirectional

Length ....... 950mm or 38"

Weight ....... 220grams

Impedance .... 75Ω

Tuning ....... Factory preset

Frequency .... Radio 195MHz~220MHz

Frequency .... VHFTV 69MHz~220MHz

Frequency .... UHFTV 510MHz~550MHz

Frequency .... FM Radio 88MHz ~ 108MHz

Mounting ..... 1/2" S/Steel Bolt

Cable ........ 3.6mtrs RG59 75Ω Coax

Connector .... Not Supplied - ASK


$165.00


The above specifications represent the maximum performance
when the antenna is in its best position


SAN206 - 75 Ohm

This antenna is the best choice for a standard digital radio or TV
that has the standard TV type push in plug.

 

The SAN206 is a 1/2 wave, 2dBi gain, ground independent, 75Ω impedance antenna that is designed specially for both Digital TV and Digital Radio, It has a stainless steel spring in a black nylon base with a 1/2" mounting section. The SAN206 is suitable for mounting almost anywhere on a vehicle and is available in white or black, longer length of cable or terminated with another type of connector.

Pros - Suitable for all mounting positions on vehicles
Cons - You will need to cut the coax to your required length and install a TV plug


Note on Connectors - Mobile One can supply the SAN206 with either a F Connector or a BNCMALE connector. please note that the only connectors that fit on 75Ω coax are BNCMALE, F, or Belling & Lee TV Plug and not SMA connector.


Look-alike Companion Antenna for UHFCB = "CL474S"
Look-alike Companion Antenna for phone NextG Telstra "MAXICDMA"
Look-alike Companion Antenna for phone GSM Optus "MAXIGSM"

Recommended Accessories - BMB bonnet mount, Z bracket OK .

 

This can be a specialized antenna please phone us before you order, if you are not sure.



SAN206SW  san206

SAN206SB  san206

 

5

Specifications

Order Code ... SAN206SW (White)
Order Code ... SAN206SB (Black)

Type ......... 1/2 Wave

Gain ......... 2dBi Both Radio & TV

Pattern ...... Omnidirectional

Length ....... 950mm or 38"

Weight ....... 220grams

Impedance .... 50Ω

Tuning ....... Factory preset

Frequency .... Radio 195MHz~220MHz

Frequency .... VHFTV 69MHz~220MHz

Frequency .... UHFTV 510MHz~550MHz

Frequency .... FM Radio 88MHz ~ 108MHz

Mounting ..... 1/2" S/Steel Bolt

Cable ........ 3.6mtrs RG58 50Ω Coax

Connector .... SMA Male Connector


$165.00

The above specifications represent the maximum performance
when the antenna is in its best position


SAN206S - 50 Ohm

This antenna is the best choice for a digital radio or TV
that has a screw-in SMA connection ( small brass thread 6mm dia ).


The SAN206 is a 1/2 wave, 2dBi gain, ground independent, 50Ω impedance antenna that is designed specially for both Digital TV and Digital Radio, It has a stainless steel spring in a black nylon base with a 1/2" mounting section. The SAN206S is suitable for mounting almost anywhere on a vehicle and is available in white or black, longer length of cable or terminated with another type of connector.

Pros - Suitable for all mounting positions on vehicles
Cons - None known

Look-alike Companion Antenna for UHFCB = "CL474S"
Look-alike Companion Antenna for phone NextG Telstra "MAXICDMA"
Look-alike Companion Antenna for phone GSM Optus "MAXIGSM"

Recommended Accessories - BMB bonnet mount, Z bracket OK .

 

 

This can be a specialized antenna please phone us before you order, if you are not sure.

 

 

 


SS206W White  ss206

SS206B Black   ss822       
6

Specifications

Order Code ... SS206W (White)
Order Code.... SS206B (Black)

Type ......... 1/2 Wave

Gain ......... 2dBi Both Radio & TV

Pattern ...... Omnidirectional

Length ....... 1250mm or 49"

Weight ....... 230grams

Impedance .... 75Ω

Tuning ....... Factory preset

Frequency..... Radio 195MHz~220MHz

Frequency .... VHFTV 69MHz~220MHz

Frequency .... UHFTV 510MHz~550MHz

Frequency .... FM Radio 88MHz ~ 108MHz

Mounting ..... 1/2" Stainless Steel Bolt

Cable ........ 3.6mtrs RG59 75Ω Coax

Connector .... Not Supplied - ASK


$185.00

The above specifications represent the maximum performance
when the antenna is in its best position

SS206 - 75 Ohm

This antenna is the best choice for a standard digital radio or TV
that has the standard TV type push in plug.


The SS206 is a 1/2 wave, 2dBi gain, ground independent, 75Ω impedance antenna that is designed specially for both Digital TV and Digital Radio, It has a stainless steel spring in a black nylon base with a 1/2" mounting section. The SS206 is suitable for mounting on most bull bars on a vehicle and is available in white or black, longer length of cable or terminated with another type of connector.

Note Connectors - Mobile One can supply the SS206 with either a F Connector or a BNCMALE connector. please note that the only connectors that fit on 75Ω coax are BNCMALE, F, or RCA TV.

Pros - Short antenna suitable for all mounting positions on vehicles.
Cons - You will need to cut the cable to your required length and install a TV plug

Lookalike Companion - UHFCB = "SS474"
Lookalike Companion = Phone NextG Telstra "SS822"
Lookalike Companion = Phone GSM Optus "SS922"

 

 

This can be a specialized antenna please phone us before you order, if you are not sure.

 

 

 

 


SS206SW White ss206

 SS206SB Black ss822
    
7

Specifications

Order Code ... SS206SW (White)
Order Code ... SS206SB (Black)

Type ......... 1/2 Wave

Gain ......... 2dBi Both Radio & TV

Pattern ...... Omnidirectional

Length ....... 1250mm or 49"

Weight ....... 230grams

Impedance .... 50Ω

Tuning ....... Factory preset

Frequency .... Radio 195MHz~220MHz

Frequency .... VHFTV 69MHz~220MHz

Frequency .... UHFTV 510MHz~550MHz

Frequency .... FM Radio 88MHz ~ 108MHz

Mounting ..... 1/2" Stainless Steel Bolt

Cable ........ 3.6mtrs RG58 50Ω Coax

Connector .... SMA Male Connector


$185.00

The above specifications represent the maximum performance
when the antenna is in its best position

SS206S - 50 Ohm

This antenna is the best choice for a digital radio or TV that has a
SMA connection ( tiny brass 6mm dia screw-in ).


The SS206S is a 1/2 wave, 2dBi gain, ground independent, 50Ω impedance antenna that is designed specially for both Digital TV and Digital Radio, It has a stainless steel spring in a black nylon base with a 1/2" mounting section. The SS206S is suitable for mounting on most bull bars and is available in white or black, longer length of cable or terminated with another type of connector.

Pros - Short heavy duty antenna suitable for bull bar on vehicles.
Cons - None that I could think of.

Lookalike Companion - UHFCB = "SS474"
Lookalike Companion = Phone NextG Telstra "SS822"
Lookalike Companion = Phone GSM Optus "SS922"

 

 

 

  

 

This can be a specialized antenna please phone us before you order, if you are not sure.