Low profile NextG/3G ground independent 1/2 wave antenna with 1/2" tough nylon fitting to suit a gutter mount, boot mount, Z bracket or similar, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector.

PRICE: TBA

Recommended Accessories - BMB

Code : M822 State Colour

The M822 is a 5mm thick heavy duty fiberglass collinear covered with polyolefin for heavy duty use and weatherproof protection available in black.

The M822 must be mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMB mount, do not use a z bracket.

Recommended Accessories - UL3.6FME with BMB or MAG3.6C works best on the RF822 range or raised feeds

Note: You can NOT use a spring with this antenna.
Note: Z brackets are not recommended with this antenna, you must use the BMB or mirror mount

PRICE: TBA

Code : M823 State Colour

The M823 is a 5mm thick heavy duty fiberglass collinear covered with polyolefin for heavy duty use and weatherproof protection available in black.

The M823 must be mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMB mount, do not use a z bracket.

Recommended Accessories - UL3.6FME with BMB or as a RF823 antenna top (see below)
Note: You can NOT use a spring with this antenna.
Note: Z brackets are not recommended with this antenna, you must use the BMB or mirror mount

PRICE: TBA

Specifications

Order Code .... RF822

Type .......... Raised Feed Dipole

Pattern ....... Omnidirectional

Total Length .. 490mm or 19"

Total Weight .. 220grams

Base Length ... 153mm or 6"

Base Weight ... 180grams

Impedance ..... 50Ω

Tuning ........ Factory preset

Frequency ..... 4G/5G

Gain Send...... 6.0dBi

Gain Receive .. 4.5dBi

VSWR .......... < 1.5:1 over 70MHz

Max Power ..... 200Watts

Mounting ...... 1/2" BSW Stud

Cable ......... 3.6Mtrs RG58 Cellfoil

Connector ..... FME Female

RF822

Highest gain for the shortest length

The RF822 is a dipole antenna commonly known as a "Raised Feed". This antenna is the most popular of all phone antennas due to its high gain and short length, The RF822 is strong, almost indestructible as it has no soldered internals that can break but rather is modular made up of parts that fit together and all are replaceable. The RF822has a stainless steel 1/4 wave tube that is its own tuned ground plane so it is not needed to be earthed in any way and it also allows the antenna to be placed in almost any location.

The RF822 has 3.6 metres of best quality high frequency double shielded Cellfoil coax, enough to mount in any location on any vehicle, and is terminated with a FME female connector that in turn connects to all available patch leads for your individual phone or modem.

The antenna top of the RF822 is a M822 which is a 5mm thick solid fiberglass collinear which is far thicker and stronger than many similar antennas and is available in black or white.

Note - It is not recommended that you use antenna tops other than mentioned Mobile One brands.

Pros - Exceptionally Broadband for NextG 3G and Edge GSM, excellent for mirror mounts on trucks.

Cons - None that I could think of.

Recommended Accessories - BMB, Z Bracket OK

PRICE: TBA

Specifications

Order Code .... RF823

Type .......... Raised Feed Dipole

Pattern ....... Omnidirectional

Total Length .. 760mm or 18"

Total Weight .. 220grams

Base Length ... 153mm or 6"

Base Weight ... 180grams

Impedance ..... 50Ω

Tuning ........ Factory preset

Frequency ..... 4G/5G

Gain Send...... 7.0dBi

Gain Receive .. 5dBi

VSWR .......... < 1.5:1 over 70MHz

Max Power ..... 200Watts

Mounting ...... 1/2" BSW Stud

Cable ......... 3.6Mtrs RG58 cellfoil

Connector ..... FME Female

RF823

Highest gain for the shortest length

The RF823 is a dipole antenna commonly known as a "Raised Feed". This antenna is the most popular of all phone antennas due to its high gain and short length, The RF823 is strong, almost indestructible as it has no soldered internals that can break but rather is modular made up of parts that fit together and all are replaceable. The RF823 has a stainless steel 1/4 wave tube that is its own tuned ground plane so it is not needed to be earthed in any way and it also allows the antenna to be placed in almost any location.

The RF823 has 3.6 metres of best quality high frequency double shielded Cellfoil coax, enough to mount in any location on any vehicle, and is terminated with a FME female connector that in turn connects to all available patch leads for your individual phone or modem.

The antenna top of the RF823 is a M823 which is a 5mm thick solid fiberglass collinear which is far thicker and stronger than many similar antennas and is available in black or white.

Note - It is not recommended that you use antenna tops other than mentioned Mobile One brands.

Note - The performance of the RF823 compared to the RF822 in most cases is not noticeable but
            technically it has a better range.

Pros - Exceptionally Broadband for NextG 3G and Edge GSM, excellent for mirror mounts on trucks.

Cons - None that I could think of.

Recommended Accessories - BMB, Z Bracket OK

PRICE: TBA

Fiberglass NextG/3G antenna with stainless steel heavy duty spring, 4m of special low loss cellfoil coax & FME connector. Available in black or white and is suitable for all vehicles and for marine environment.

Best choice for bull bar - especially diesel vehicles

Look-alike Companion Antenna for UHF CB "SS474"

Suitable For All Mobile Phones 4G & 5G

PRICE: TBA

Fiberglass NextG/3G antenna with stainless steel heavy duty spring, 4m of special low loss cellfoil coax & FME connector. Available in black or white and is suitable for all vehicles and for marine environment.

Best choice for bull bar - especially diesel vehicles

Look-alike Companion Antenna for UHF CB "SS476"

Warning This antenna has rather high gain and has a
low radiation pattern that makes it ideal for highway
use,  but not so good in hills or mountainous  terrain.

Suitable For All Mobile Phones 4G & 5G

PRICE: TBA

Quick and Easy Removable Phone & Modem Antennas

The antennas below have a N type connector at the base so will connect only to the SAMN mount

3.6mtr long cellfoil cable with female FME connectors each end to suit SAMN Plug & Play base (CN Range)

Heavy duty antenna mount with FME side connection and a N connector female top to suit phone antennas (CN Range)

Fiberglass NextG/3G antenna with stainless steel heavy duty spring
Available in black or white and is suitable for all vehicles and for marine environment.

Look-alike Companion Antenna for UHF CB "CP474S"

Suitable For All Mobile Phones 4G & 5G

PRICE: TBA

Fiberglass NextG/3G antenna kit including SAMN base and cable assembly, removable from base
Available in black or white and is suitable for all vehicles and for marine environment.

Look-alike Companion Antenna for UHF CB "CP474SAMPK"

Suitable For All Mobile Phones 4G & 5G

PRICE: TBA

Fiberglass NextG/3G antenna with stainless steel heavy duty spring, removable from base
Available in black or white and is suitable for all vehicles and for marine environment.

Look-alike Companion Antenna for UHF CB "CP476S"

Warning This antenna has rather high gain and has a
low radiation pattern that makes it ideal for highway
use,  but not so good in hills or mountainous  terrain.

Suitable For All Mobile Phones 4G & 5G

PRICE: TBA

Fiberglass NextG/3G antenna kit including SAMN base and cable assembly, removable from base
Available in black or white and is suitable for all vehicles and for marine environment.

Warning This antenna has rather high gain and has a
low radiation pattern that makes it ideal for highway
use,  but not so good in hills or mountainous  terrain.

Look-alike Companion Antenna for UHF CB "CP476SAMPK"

Suitable For All Mobile Phones 4G & 5G

PRICE: TBA

Home Base Omnidirectional High Gain Phone Antennas   

Fiberglass NextG/3G antenna with stainless steel spring, 10mtrs of special low loss cellfoil coax & FME connector.
The MEGACDMA has a high gain and a low angle of radiation so it is not recommended as a mobile antenna unless the terrain traveled is flat and the antenna is mounted high on the vehicle

The MEGACDMA is available in black or white and is a excellent choice for a base station antenna.

Suitable for NextG / 3G and Edge 2G

COL823W    White 

COL823B    Black 

Fiberglass Base station NextG/3G antenna with 20mm aluminum tube mounting section, 10mtrs of special low loss cellfoil coax & FME connector. Available in black or white and with any length of cable and connector.

The COL823 works best when mounted as high as possible with the shortest possible length of cable.

Suitable For All Mobile Phones 4G & 5G

PRICE: TBA