All Mobileone Antennas
400MHz to 520MHz
The following antennas are sorted by the frequency that they are designed for!
Example :400MHz to 520MHz means that particular antenna can be made anywhere within that range
but not that the antenna will transmit over that entire range as this is impossible for a transmitting antenna.
BNCMD+freq MHz  |
||
| Length | Gain | Description of the BNCMD+freq MHz e.g. BNCMD435 |
|---|---|---|
6" |
BNC Connection, 1/4 wave antenna which is made with tough nylon tubing covered entirely with polyolefin for heavy duty use and weatherproof protection. This antenna is made primarily for hand held transceivers and has a very large bandwidth making it an excellent choice. |
|
BNCHW+freq MHz  |
||
| Length | Gain | Description of the BNCHW+freq MHz e.g. BNCHW435 |
|---|---|---|
14" |
BNC Connection, Ground independent 1/2 wave, made with tough nylon tubing covered with polyolefin for heavy duty use and weatherproof protection. This antenna is primarily for hand held transceivers but can be used in other applications where an in-line antenna is required. |
|
TNCHW+freq MHz  |
||
| Length | Gain | Description of the TNCHW+freq MHz e.g. TNCHW435 |
|---|---|---|
14" |
TNC Connection, Ground independent 1/2 wave, made with tough nylon tubing covered with polyolefin for heavy duty use and weatherproof protection. This antenna is primarily for hand held transceivers but can be used in other applications where an in-line antenna is required. |
|
PLHW+freq MHz  |
||
| Length | Gain | Description of the PLHW+freq MHz e.g. PLHW435 |
|---|---|---|
14" |
PL259 Connection, Ground independent 1/2 wave, made with tough nylon tubing covered with polyolefin for heavy duty use and weatherproof protection. This antenna is primarily for hand held transceivers but can be used in other applications where an in-line antenna is required. |
|
 |
SMAHW+freq MHz |
||
| Length | Gain | Description of the SMAHW+freq MHz e.g. SMAHW435 | |
|---|---|---|---|
13" |
SMAHW for radios where the SMA antenna connector SMA Connection, 1/2 wave ground independent antenna with a SMA connector designed especially for exposed SMA connectors on hand held radios. Covered entirely with polyolefin for heavy duty use and weatherproof protection and is also available in White, RED, GREEN, BLUE or YELLOW, mention colour when ordering |
||
SMAIHW+freq MHz |
|||
| Length | Gain | Description of the SMAHW+freq MHz e.g. SMAIHW435 | |
13" |
SMAIHW for radios where the SMA antenna connector SMA Connection, 1/2 wave ground independent antenna designed especially for exposed SMA connectors on hand held radios. Covered entirely with polyolefin for heavy duty use and weatherproof protection and is also available in White, RED, GREEN, BLUE or YELLOW, mention colour when ordering |
||
C + freq + H eg: C420H  |
|||
| Frequency | Length | Description | |
|---|---|---|---|
400 to 520MHz |
14 " |
1/2 wave ground independent antenna with internal LC network plus 3.6m coax |
|
The following antennas have a 5/16" female fitting to suit all
UHF Bases and require to be
|
FDW+freq MHz  |
||
| Code | |
Description |
|---|---|---|
6" |
Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 410MHz to 430MHz |
|
6" |
Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 430MHz to 450MHz |
|
6" |
Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 450MHz to 470MHz |
|
5" |
Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 470MHz to 490MHz |
|
5" |
Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 490MHz to 520MHz |
|
M410  |
|||
| Frequency | Description of the M410 | ||
|---|---|---|---|
28" |
Antenna UHF collinear fiberglass covered with PVC 4.5dB gain |
||
M430  |
|||
| Frequency | Description of the M430 | ||
|---|---|---|---|
| 680mm 27" |
Antenna UHF collinear fiberglass covered with PVC 4.5dB gain |
||
M460  |
|||
| Frequency | Description of the M460 | ||
|---|---|---|---|
| 460~470MHz | 25" |
Antenna UHF collinear fiberglass covered with PVC 4.5dB gain |
|
 M460 antenna on the center of roof of test vehicle |
|||
M460HD  |
|||
| Frequency | Description of the M460HD | ||
|---|---|---|---|
| 462~474MHz | 640mm 25" |
Antenna UHF collinear fiberglass covered with polyolefin 4.5dB gain 7mm thick heavy duty |
|
RF460FWSS  |
|
SpecificationsOrder Code .... RF460FWSS Type .......... Raised Feed Dipole Pattern ....... Omnidirectional Total Length .. 820mm or 33" Total Weight .. 360grams Base Length ... 225mm or 9" Base Weight ... 250grams Impedance ..... 50Ω Tuning ........ Factory preset Frequency ..... 462MHz ~ 474MHz Gain Send...... 6.5dBi Gain Receive .. 4.5dBi VSWR .......... < 1.5:1 over 14MHz Max Power ..... 200Watts Mounting ...... 1/2" UNF Stud Cable ......... 4.3Mtrs RG58CU 50Ω Connector ..... PL259S Supplied The above specifications represent the maximumperformance when the antenna is in its best position |
RF460FWSSWith A Stainless Steel Spring & Heavy Duty Fiberglass Antenna TopThe RF460FWSS is a dipole antenna commonly known as a "Raised Feed". This antenna is the most popular of all UHF CB antennas due to its high gain and short length. The RF460FWSS is strong, almost indestructible as it has no soldered internals that can break but rather is modular made up of parts that fit together and all are replaceable. One of the key features of the RF460FWSS is the ability of using a large range of different antenna tops allowing for different colours, lengths and gains. The RF460FWSS has a solid Stainless Steel 1/4 wave tube that is its own tuned ground plane so it is not needed to be earthed in any way and also allows the antenna to be placed in almost any location. It is usually supplied with 4.3 metres of excellent quality RG58cu coax, which is enough to mount in most locations on a vehicle, and is provided with a PL259 solder type connector. The RF460FWSS has a light duty spring to absorb the vibration from moving vehicles and is ideal for bull bar mounting on petrol vehicles.
|
RF460FWMS  |
|
SpecificationsOrder Code .... RF460FWMS Type .......... Raised Feed Dipole Pattern ....... Omnidirectional Total Length .. 870mm or 35" Total Weight .. 530grams Base Length ... 270mm or 11" Base Weight ... 460grams Impedance ..... 50Ω Tuning ........ Factory preset Frequency ..... 462MHz ~ 474MHz Gain Send...... 6.5dBi Gain Receive .. 4.5dBi VSWR .......... < 1.5:1 over 14MHz Max Power ..... 200Watts Mounting ...... 1/2" BSW Stud Cable ......... 4.3Mtrs RG58CU 50Ω Connector ..... PL259S Supplied The above specifications represent the maximum performance when the antenna is in its best position |
RF460FWMSWith A Heavy Duty Large Stainless Steel Spring & Heavy Duty Fiberglass Antenna TopThe RF460FWMS is a dipole antenna commonly known as a "Raised Feed". This antenna is the most popular of all UHF CB antennas due to its high gain and short length. The RF460FWMS is strong, almost indestructible as it has no soldered internals that can break but rather is modular made up of parts that fit together and all are replaceable. One of the key features of the RF470FWMS is the ability of using a large range of different antenna tops allowing for different colours, lengths and gains. The RF460FWMS has a solid Stainless Steel 1/4 wave tube that is its own tuned ground plane so it is not needed to be earthed in any way and also allows the antenna to be placed in almost any location. It is usually supplied with 4.3 metres of excellent quality RG58cu coax, which is enough to mount in most locations on a vehicle, and is provided with a PL259 solder type connector. The RF460FWMS has a heavy duty spring to absorb the vibration from moving vehicles and is ideal for bull bar mounting on all vehicles. Note - Mobile One Raised Feeds are made to work exactly to specification so any other brand of antenna top should work well with the Mobile One Raised Feed base (as long as they have been made properly) but it is not recommended that you use antenna tops other than mentioned Mobile One brand we want you to buy ours :-).
|